Development Of Smart Dental Mirror Based On Light Sensor And The Effectiveness Of Its Application On The Quality Of Examination
DOI:
https://doi.org/10.31983/jkg.v13i1.11317Keywords:
Dentistry, Smart Dental MirrorAbstract
A common problem faced by dentists and dental therapists when using a conventional dental mirror is the need for additional light, such as a flashlight or headlamp, to perform examinations on patients, thereby reducing the effectiveness and efficiency of the examination process. The purpose of this research is to produce innovative tools and analyze their effectiveness to assess the quality of the examination in the aspects of simplicity, safety, efficiency, and accuracy. This research uses the Research and Development (R&D) method with stages: information gathering, product development design, expert validation, product trials, and product results. Sampling totaled 33, consisting of 3 experts and 30 respondents from dental and oral health workers. The independent variable is the Smart Dental Mirror tool. The research data were tested using a Likert Scale and SPSS program analysis Wilcoxon Signed Rank Test. The results of this study are that the Smart Dental Mirror is feasible, with the results of testing by experts using a Likert Scale of 93.05%. The results of the effectiveness test of using Smart Dental Mirror show a value of entirely at 0.000 (p <0.05) in the aspects of simplicity, safety, efficiency, and accuracy.
References
M. Sari and N. F. Jannah, “Gambaran Pengetahuan Kesehatan Gigi Mulut, Perilaku Kesehatan Gigi Mulut, dan Status Gigi Lansia di Panti Wreda Surakarta,†J. Surya Masy., vol. 3, no. 2, p. 86, 2021, doi: 10.26714/jsm.3.2.2021.86-94.
A. Srilatha, D. Doshi, S. Kulkarni, and M. Reddy, “Conventional diagnostic aids in dental caries,†J. Glob. Oral Heal., vol. 2, no. 1, pp. 53–58, 2019, doi: 10.25259/jgoh_42_2019.
B. Uzun, D. U. Ozsahin, H. Hamdan, J. Charafeddine, G. Ünsal, and D. Özyer, “Optimization of Dental Devices and Tools Used on Teeth,†Biomed Res. Int., vol. 2021, 2021, doi: 10.1155/2021/9913788.
T. Sachedina, K. S. Sohal, S. S. Owibingire, and O. J. M. Hamza, “Reasons for Delay in Seeking Treatment for Dental Caries in Tanzania,†Int. Dent. J., 2022, doi: 10.1016/j.identj.2022.07.012.
T. J. Sinaga, R. Aloyina, B. Tarigan, M. Magdalena, and R. N. Sitorus, “Rancangan Produk Smart Dental Mirror with Auto LED dengan Metode Brainstorming TALENTA Conference Series Rancangan Produk Smart Dental Mirror with Auto LED dengan Metode Brainstorming,†vol. 5, no. 2, pp. 0–6, 2022, doi: 10.32734/ee.v5i2.1567.
M. S. Fallensky, “Pengembangan Media Pembelajaran Interaktif Berbasis Macromedia Flash Materi Kewargaan Digital Di Smk Pasim Plus Sukabumi,†J. Kependidikan, vol. 7, no. 1, pp. 42–49, 2021, doi: 10.37150/jut.v7i1.1094.
Sunarjo L. and Sariyem., Dasar-Dasar Ilmu Penggunaan Alat-Alat Kesehatan Gigi. 2017.
L. P. Sinambela, Reformasi Pelayanan Publik. Jakarta: PT Bumi Akasa, 2018.
P. N. Paqué and M. Özcan, “A Review on Biocompatibility of Dental Restorative and Reconstruction Materials,†Curr. Oral Heal. Reports, vol. 11, no. 1, pp. 68–77, 2024, doi: 10.1007/s40496-023-00358-9.
M. Mogenot et al., “Efficacy, tolerability, and safety of an innovative medical device for improving oral accessibility during oral examination in special-needs patients: A multicentric clinical trial,†vol. 15, no. 9 September, pp. 1–19, 2020, doi: 10.1371/journal.pone.0239898.
A. Vasan and J. Friend, “Medical Devices for Low- And Middle-Income Countries: A Review and Directions for Development,†J. Med. Devices, Trans. ASME, vol. 14, no. 1, pp. 1–7, 2020, doi: 10.1115/1.4045910.
A. H. Zamzam, A. K. Abdul Wahab, M. M. Azizan, S. C. Satapathy, K. W. Lai, and K. Hasikin, “A Systematic Review of Medical Equipment Reliability Assessment in Improving the Quality of Healthcare Services,†Front. Public Heal., vol. 9, no. September, pp. 1–12, 2021, doi: 10.3389/fpubh.2021.753951.
Downloads
Published
Issue
Section
License
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. that allows others to share — copy and redistribute the material in any medium or format and adapt — remix, transform, and build upon the material for any purpose, even commercially with an acknowledgment of the work's authorship and initial publication in this journal.
.png)
.png)
.png)
